Playing Megabonk on PC with a controller or gamepad should be smooth and intuitive, but some players report that their controller is not recognized or stops working mid-game. This can make gameplay frustrating, especially in fast-paced matches.
Controller issues are usually caused by outdated drivers, incorrect input settings, software conflicts, or faulty USB connections. In this detailed 2025 guide, we’ll walk you through step-by-step solutions to fix controller problems and get you back in the action.
Common Causes of Controller / Gamepad Issues in Megabonk
- Outdated or missing controller drivers
- USB or wireless connection problems
- Incorrect input settings in Megabonk
- Conflicts with Steam, Epic Games, or other software
- Faulty or incompatible controller
- Background programs interfering with input
- Corrupted game files
Identifying the cause helps you apply the most effective fix.
1. Check Physical Connections
Start with the basics:
- Ensure the controller is properly connected via USB or Bluetooth.
- Try using a different USB port.
- For wireless controllers, make sure battery is charged.
- Test the controller on another game or PC to verify it works.
2. Update Controller Drivers
Outdated drivers prevent the PC from recognizing your controller.
- Xbox Controllers:
- Open Device Manager → Human Interface Devices → Xbox Controller
- Right-click → Update driver → Search automatically.
- PlayStation DualShock / DualSense Controllers:
- Use DS4Windows or Steam Input for proper driver support.
- Update via Windows if using USB connection.
- Generic USB Controllers:
- Check the manufacturer’s website for latest drivers.
Restart your PC after updating.
3. Configure Steam Input / Epic Games Settings
Sometimes the game doesn’t detect controllers due to launcher settings:
- Steam Users:
- Open Steam → Library → Right-click Megabonk → Properties → Controller.
- Set Override for Megabonk → Enable Steam Input.
- Epic Games Users:
- Launch Epic Games Launcher → Library → Megabonk.
- Open Settings → Enable Gamepad Input if available.
4. Disable Background Applications
Programs like Discord, OBS, or Voicemeeter can interfere with controllers.
Steps:
- Press Ctrl + Shift + Esc → Task Manager.
- End unnecessary programs.
- Launch Megabonk again and test the controller.
5. Reconnect the Controller
Sometimes a simple reconnection solves the issue:
- Disconnect the controller.
- Restart your PC.
- Reconnect the controller before launching Megabonk.
6. Verify Game Files
Corrupted game files may cause input issues:
- Steam: Right-click Megabonk → Properties → Local Files → Verify Integrity of Game Files.
- Epic Games: Library → Megabonk → Three Dots → Verify.
7. Change USB Ports / Cables
Faulty USB ports or cables can cause intermittent controller detection:
- Use a high-quality USB cable (for wired controllers).
- Try different USB 2.0 or 3.0 ports.
- Avoid USB hubs, as direct connection is more reliable.
8. Update Windows
Outdated system software can conflict with controllers:
- Go to Settings → Update & Security → Windows Update
- Check for updates and install them.
- Restart your PC after updates.
9. Configure Controller in Game Settings
Ensure Megabonk’s in-game input settings are correctly set:
- Open Settings → Controls
- Set Input Device to your controller
- Check that key bindings match your controller buttons.
10. Reinstall Megabonk (If Necessary)
If all else fails, corrupted game files may prevent proper controller detection:
- Uninstall Megabonk.
- Delete leftover files in Documents / AppData.
- Reinstall the game on your preferred drive (SSD recommended).
Additional Tips
- Use wired connections for more stable controller input.
- Keep your controller firmware updated (DualSense, Xbox, or other).
- Disable Steam Big Picture mode if it conflicts with input.
- Restart Windows Input Services: Press Win + R → type
services.msc→ restart Human Interface Device Service. - Avoid running multiple game launchers simultaneously.
Frequently Asked Questions (FAQs)
Q1: Why is my controller not detected in Megabonk?
- Common reasons include outdated drivers, incorrect input settings, or USB connection issues.
Q2: Can a wireless controller work better wired?
- Yes. Wired connections are more stable and avoid Bluetooth latency or interference.
Q3: Will reinstalling Megabonk fix controller issues?
- Yes, if the problem is caused by corrupted or missing files.
Q4: Do I need third-party software for PlayStation controllers?
- Yes. DS4Windows or Steam Input helps Windows recognize DualShock/DualSense controllers.
Q5: Can USB hubs cause problems?
- Yes. Always connect the controller directly to a USB port on your PC.
Conclusion
Megabonk controller or gamepad not working on PC can be frustrating, but most issues are fixable. Start by checking physical connections, updating drivers, and configuring input settings.
If the problem persists, verify game files, reconnect the controller, or reinstall the game. Following these steps ensures that your controller works reliably, letting you enjoy fast-paced Megabonk gameplay without interruptions. 🎮
