If you’re trying to launch FACEIT Anti-Cheat (FACEIT AC) and suddenly see the message “Your PC Requires the Following Settings to Be Enabled”, don’t worry—you’re not alone.
This error commonly appears when your Secure Boot or TPM 2.0 settings are disabled in the BIOS, preventing FACEIT’s anti-cheat software from running properly. Since FACEIT AC enforces strict system integrity checks to ensure fair gameplay, it requires specific security settings to be enabled at the hardware level.
In this guide, we’ll explain the main causes of the issue and provide step-by-step fixes to get FACEIT AC running smoothly on your Windows 10 or Windows 11 PC.
Common Causes of the Error
Before applying fixes, it’s important to understand what triggers this error:
- Secure Boot or TPM 2.0 is disabled in BIOS/UEFI
- System is in Setup Mode instead of User Mode
- Outdated BIOS or UEFI firmware
- Using Legacy (CSM) Boot Mode instead of UEFI
- Corrupted Windows installation or system misconfiguration
Fix 1: Enable Secure Boot in BIOS
FACEIT AC requires Secure Boot to verify that your PC’s firmware is trusted.
- Restart your PC and press the BIOS key during boot (usually F2, F10, DEL, or ESC).
- In BIOS, find Boot or Security tab.
- Locate Secure Boot and enable it.
- Save changes and exit (usually F10).
💡 Note: If Secure Boot is greyed out, make sure your boot mode is set to UEFI (see Fix 3 below).
Fix 2: Enable TPM 2.0 (Trusted Platform Module)
FACEIT Anti-Cheat uses TPM for system verification.
- Restart your PC → Press F2 or DEL to open BIOS.
- Go to Security or Advanced Settings.
- Find TPM, PTT (Intel), or fTPM (AMD).
- Enable TPM 2.0.
- Save and exit BIOS.
✅ After rebooting, FACEIT AC should recognize TPM and run normally.
Fix 3: Switch from Legacy to UEFI Boot Mode
FACEIT AC doesn’t work correctly under Legacy/CSM Boot Mode.
- Open System Information (
msinfo32in Windows Search). - Check the BIOS Mode section.
- If it says Legacy, you’ll need to switch to UEFI.
- To switch safely:
- Open Command Prompt (Admin).
- Run:
mbr2gpt /convert /allowfullos - Reboot and enter BIOS → set Boot Mode to UEFI.
- Save and restart your PC.
💡 Converting from MBR to GPT ensures UEFI compatibility for Secure Boot.
Fix 4: Set System to User Mode (Disable Setup Mode)
If your system shows “Secure Boot can be enabled when system in User Mode,” then Secure Boot is locked in Setup Mode.
To fix this:
- Enter BIOS again.
- Navigate to Security → Secure Boot.
- Look for Key Management or Install Default Keys option.
- Select Install Default Secure Boot Keys.
- Change Secure Boot Mode from Custom to Standard/User.
- Save and reboot.
✅ This activates User Mode, allowing Secure Boot to be properly enabled.
Fix 5: Update BIOS/UEFI Firmware
An outdated BIOS can block TPM and Secure Boot from functioning properly.
- Visit your motherboard manufacturer’s official website.
- Download the latest BIOS version for your model.
- Follow the on-screen or support instructions to update safely.
- After update, re-enable TPM and Secure Boot if necessary.
⚠️ Be careful—don’t interrupt power during BIOS updates.
Fix 6: Check Windows Security Settings
Sometimes, FACEIT AC errors appear even after BIOS changes due to OS-level configuration issues.
- Press Windows + I → Privacy & Security → Windows Security → Device Security.
- Confirm that Core isolation, Secure Boot, and TPM 2.0 are active.
- If disabled, re-enable from BIOS and restart again.
Fix 7: Reinstall FACEIT Anti-Cheat
Corrupted FACEIT AC files can trigger false configuration errors.
- Press Windows + R, type:
appwiz.cpl - Uninstall FACEIT Anti-Cheat.
- Reboot your system.
- Reinstall it from the official site: https://www.faceit.com/en/anti-cheat
✅ Run FACEIT AC as Administrator after reinstalling.
Fix 8: Reset BIOS to Default Settings
If incorrect BIOS tweaks cause conflicts:
- Enter BIOS → find Load Optimized Defaults or Reset to Default.
- Apply changes, then re-enable Secure Boot and TPM manually.
- Save and exit.
Fix 9: Disable Overclocking and Third-Party Tools
Overclocking or third-party BIOS tools may trigger anti-cheat flags.
- Restore CPU/GPU clock settings to default.
- Close background programs such as MSI Afterburner or Intel XTU.
- Relaunch FACEIT AC.
Fix 10: Reinstall Windows (Last Option)
If none of the above methods work, the issue might be deep in your OS configuration.
- Backup your data.
- Create a Windows 11 USB installer.
- Perform a clean installation.
- Enable TPM 2.0 and Secure Boot during setup.
Additional Tips
- Always update chipset and graphics drivers.
- Avoid dual-boot setups that disable Secure Boot.
- Run System File Checker (
sfc /scannow) to repair missing files. - Disable Fast Startup to prevent BIOS settings conflicts.
Frequently Asked Questions (FAQs)
Q1: What causes the “Your PC Requires the Following Settings to Be Enabled” error?
A1: The error appears when Secure Boot or TPM 2.0 is disabled, or if your system runs in Legacy/Setup mode.
Q2: Is Secure Boot mandatory for FACEIT AC?
A2: Yes. FACEIT AC requires Secure Boot and TPM 2.0 for enhanced anti-cheat protection.
Q3: Can I bypass this error without enabling TPM?
A3: No. FACEIT Anti-Cheat needs TPM to verify hardware integrity and prevent tampering.
Q4: How do I check if TPM is active?
A4: Press Windows + R, type tpm.msc, and press Enter.
Q5: Will updating BIOS erase my data?
A5: No, BIOS updates don’t affect Windows data—but always back up before updating.
Conclusion
The “Your PC Requires the Following Settings to Be Enabled” error in FACEIT AC might look intimidating, but it’s easy to fix once you know where to look.
By enabling Secure Boot and TPM 2.0, switching to UEFI, and ensuring your BIOS is in User Mode, you can quickly get FACEIT Anti-Cheat running without errors.
If problems persist, reinstall FACEIT AC or update your BIOS for complete compatibility. Once fixed, you’ll be ready to jump back into ranked matches—without interruptions or anti-cheat errors. 🛡️🎮
